The Active-Site [4Fe-4S] Cluster in the Isoprenoid Biosynthesis Enzyme IspH Adopts Unexpected Redox States during Ligand Binding and Catalysis.

(E)-4-Hydroxy-3-methylbut-2-enyl diphosphate reductase, or IspH (formerly known as LytB), catalyzes the terminal step of the bacterial methylerythritol phosphate (MEP) pathway for isoprene synthesis. This step converts (E)-4-hydroxy-3-methylbut-2-enyl diphosphate (HMBPP) into one of two possible isomeric products, either isopentenyl diphosphate (IPP) or dimethylallyl diphosphate (DMAPP). This reaction involves the removal of the C4 hydroxyl group of HMBPP and addition of two electrons. IspH contains a [4Fe-4S] cluster in its active site, and multiple cluster-based paramagnetic species of uncertain redox and ligation states can be detected after incubation with reductant, addition of a ligand, or during catalysis. To characterize the clusters in these species, 57Fe-labeled samples of IspH were prepared and studied by electron paramagnetic resonance (EPR), 57Fe electron-nuclear double resonance (ENDOR), and Mössbauer spectroscopies. Notably, this ENDOR study provides a rarely reported, complete determination of the 57Fe hyperfine tensors for all four Fe ions in a [4Fe-4S] cluster. The resting state of the enzyme (Ox) has a diamagnetic [4Fe-4S]2+ cluster. Reduction generates [4Fe-4S]+ (Red) with both S = 1/2 and S = 3/2 spin ground states. When the reduced enzyme is incubated with substrate, a transient paramagnetic reaction intermediate is detected (Int) which is thought to contain a cluster-bound substrate-derived species. The EPR properties of Int are indicative of a 3+ iron-sulfur cluster oxidation state, and the Mössbauer spectra presented here confirm this. Incubation of reduced enzyme with the product IPP induced yet another paramagnetic [4Fe-4S]+ species (Red+P) with S = 1/2. However, the g-tensor of this state is commonly associated with a 3+ oxidation state, while Mössbauer parameters show features typical for 2+ clusters. Implications of these complicated results are discussed.

Spectroscopic and Theoretical Investigation of High-Spin Square-Planar and Trigonal Fe(II) Complexes Supported by Fluorinated Alkoxides.

The electronic structures and spectroscopic behavior of three high-spin FeII complexes of fluorinated alkoxides were studied: square-planar {K(DME)2}2[Fe(pinF)2] (S) and quasi square-planar {K(C222)}2[Fe(pinF)2] (S') and trigonal-planar {K(18C6)}[Fe(OC4F9)3] (T) where pinF = perfluoropinacolate and OC4F9 = tris-perfluoro-t-butoxide. The zero-field splitting (ZFS) and hyperfine structure parameters of the S = 2 ground states were determined using field-dependent 57Fe Mössbauer and high-field and -frequency electron paramagnetic resonance (HFEPR) spectroscopies. The spin Hamiltonian parameters were analyzed with crystal field theory and corroborated by density functional theory (DFT) and ab initio complete active space self-consistent field (CASSCF) calculations. Whereas the ZFS tensor of S has a small rhombicity, E/D = 0.082, and a positive D = 15.17 cm-1, T exhibits a negative D = -9.16 cm-1 and a large rhombicity, E/D = 0.246. Computational investigation of the structural factors suggests that the ground-state electronic configuration and geometry of T's Fe site are determined by the interaction of [Fe(OC4F9)3]- with {K(18C6)}+. In contrast, two distinct countercations of S/S' have a negligible influence on their [Fe(pinF)2]2- moieties. Instead, the distortions in S' are likely induced by the chelate ring conformation change from δλ, observed for S, to the δδ conformation, determined for S'.

Homologous acetone carboxylases select Fe(II) or Mn(II) as the catalytic cofactor.

Acetone carboxylases (ACs) catalyze the metal- and ATP-dependent conversion of acetone and bicarbonate to form acetoacetate. Interestingly, two homologous ACs that have been biochemically characterized have been reported to have different metal complements, implicating different metal dependencies in catalysis. ACs from proteobacteria Xanthobacter autotrophicus and Aromatoleum aromaticum share 68% sequence identity but have been proposed to have different catalytic metals. In this work, the two ACs were expressed under the same conditions in Escherichia coli and were subjected to parallel chelation and reconstitution experiments with Mn(II) or Fe(II). Electron paramagnetic and Mössbauer spectroscopies identified signatures, respectively, of Mn(II) or Fe(II) bound at the active site. These experiments showed that the respective ACs, without the assistance of chaperones, second metal sites, or post-translational modifications facilitate correct metal incorporation, and despite the expected thermodynamic preference for Fe(II), each preferred a distinct metal. Catalysis was likewise associated uniquely with the cognate metal, though either could potentially serve the proposed Lewis acidic role. Subtle differences in the protein structure are implicated in serving as a selectivity filter for Mn(II) or Fe(II).IMPORTANCEThe Irving-Williams series refers to the predicted stabilities of transition metal complexes where the observed general stability for divalent first-row transition metal complexes increase across the row. Acetone carboxylases (ACs) use a coordinated divalent metal at their active site in the catalytic conversion of bicarbonate and acetone to form acetoacetate. Highly homologous ACs discriminate among different divalent metals at their active sites such that variations of the enzyme prefer Mn(II) over Fe(II), defying Irving-Williams-predicted behavior. Defining the determinants that promote metal discrimination within the first-row transition metals is of broad fundamental importance in understanding metal-mediated catalysis and metal catalyst design.

Evolution of Bonding and Magnetism via Changes in Valence Electron Count in CuFe2-xCoxGe2.

A series of solid solutions, CuFe2-xCoxGe2 (x = 0, 0.2, 0.4, 0.8, and 1.0), have been synthesized by arc-melting and characterized by powder X-ray and neutron diffraction, magnetic measurements, Mössbauer spectroscopy, and electronic band structure calculations. All compounds crystallize in the CuFe2Ge2 structure type, which can be considered as a three-dimensional framework built of fused MGe6 octahedra and MGe5 trigonal bipyramids (M = Fe and Co), with channels filled by rows of Cu atoms. As the Co content (x) increases, the unit cell volume decreases in an anisotropic fashion: the b and c lattice parameters decrease while the a parameter increases. The changes in all the parameters are nearly linear, thus following Vegard's law. CuFe2Ge2 exhibits two successive antiferromagnetic (AFM) orderings, corresponding to the formation of a commensurate AFM structure, followed by an incommensurate AFM structure observed at lower temperatures. As the Co content increases, the AFM ordering temperature (TN) gradually decreases, and only one AFM transition is observed for x ≥ 0.2. The magnetic behavior of unsubstituted CuFe2Ge2 was found to be sensitive to the preparation method. The temperature-dependent zero-field 57Fe Mössbauer spectra reveal two hyperfine split components that evolve in agreement with the two consecutive AFM orderings observed in magnetic measurements. In contrast, the field-dependent spectra obtained for fields ≥2 T reveal a parallel arrangement of the moments associated with the two crystallographically unique metal sites. Electronic band structure calculations and chemical bonding analysis reveal a mix of strong M-M antibonding and non-bonding states at the Fermi level, in support of the overall AFM ordering observed in zero field. The substitution of Co for Fe reduces the population of the M-M antibonding states and the overall density of states at the Fermi level, thus suppressing the TN value.

Electronic Structure of Tetrahedral, S = 2, [Fe{(EPiPr2)2N}2], E = S, Se, Complexes: Investigation by High-Frequency and -Field Electron Paramagnetic Resonance, 57Fe Mössbauer Spectroscopy, and Quantum Chemical Studies.

In this work, we assessed the electronic structures of two pseudotetrahedral complexes of FeII, [Fe{(SPiPr2)2N}2] (1) and [Fe{(SePiPr2)2N}2] (2), using high-frequency and -field EPR (HFEPR) and field-dependent 57Fe Mössbauer spectroscopies. This investigation revealed S = 2 ground states characterized by moderate, negative zero-field splitting (zfs) parameters D. The crystal-field (CF) theory analysis of the spin Hamiltonian (sH) and hyperfine structure parameters revealed that the orbital ground states of 1 and 2 have a predominant dx2-y2 character, which is admixed with dz2 (∼10%). Although replacing the S-containing ligands of 1 by their Se-containing analogues in 2 leads to a smaller |D| value, our theoretical analysis, which relied on extensive ab initio CASSCF calculations, suggests that the ligand spin-orbit coupling (SOC) plays a marginal role in determining the magnetic anisotropy of these compounds. Instead, the dx2-y2ß â†’ dxyß excitations yield a large negative contribution, which dominates the zfs of both 1 and 2, while the different energies of the dx2-y2ß â†’ dxzß transitions are the predominant factor responsible for the difference in zfs between 1 and 2. The electronic structures of these compounds are contrasted with those of other [FeS4] sites, including reduced rubredoxin by considering a D2-type distortion of the [Fe(E-X)4] cores, where E = S, Se; X = C, P. Our combined CASSCF/DFT calculations indicate that while the character of the orbital ground state and the quintet excited states' contribution to the zfs of 1 and 2 are modulated by the magnitude of the D2 distortion, this structural change does not impact the contribution of the excited triplet states.

Insights into Molecular Magnetism in Metal-Metal Bonded Systems as Revealed by a Spectroscopic and Computational Analysis of Diiron Complexes.

A pair of bimetallic compounds featuring Fe-Fe bonds, [Fe(iPrNPPh2)3FeR] (R = PMe3, ≡NtBu), have been investigated using High-Frequency Electron Paramagnetic Resonance (HFEPR) as well as field- and temperature-dependent 57Fe nuclear γ resonance (Mössbauer) spectroscopy. To gain insight into the local site electronic structure, we have concurrently studied a compound containing a single Fe(II) in a geometry analogous to that of one of the dimer sites. Our spectroscopic studies have allowed for the assessment of the electronic structure via the determination of the zero-field splitting and 57Fe hyperfine parameters for the entire series. We also report on our efforts to correlate structure with physical properties in metal-metal bonded systems using ligand field theory guided by quantum chemical calculations. Through the insight gained in this study, we discuss strategies for the design of single-molecule magnets based on polymetallic compounds linked via direct metal-metal bonds.

Model Dimeric Manganese(IV) Complexes Featuring Terminal Tris-hydroxotetraazaadamantane and Various Bridging Ligands.

A series of model dinuclear manganese(IV) complexes of the general formula [(H3COH)(L')MnIV(µ-L)2MnIV(L')(HOCH3)] is presented. These compounds feature capping 4,6,10-trihydroxo-3,5,7-trimethyl-1,4,6,10-tetraazaadamantane ligands derived from a polydentate oxime compound (L'). The bridging ligands L include azide (1), methoxide (2), and oxalate (3) anions. The magnetic properties and high-field (HF) EPR spectra of 1-3 were studied in detail and revealed varying weak antiferromagnetic coupling and modest zero-field splitting (ZFS) of the local quartet spin sites. Our HF EPR studies provide insight into the dimer ZFS, including determination of the corresponding parameters by giant spin approach for methoxido-bridged complex 2. Furthermore, the physicochemical properties of 1-3 were studied using IR, UV-vis, and electrochemical (cyclic voltammetry) methods. Theoretical exchange coupling constants were obtained using broken-symmetry (BS) density functional theory (DFT). Computational estimates of the local quartet ground spins state ZFSs of 1-3 were obtained using coupled-perturbed (CP) DFT and complete active space self-consistent field (CASSCF) calculations with n-electron valence state perturbation theory (NEVPT2) corrections. We found that the CP DFT calculations which used the B3LYP functional and models derived experimental structures performed best in reproducing both the magnitude and the sign of the experimental D values. Moreover, our computational investigation of 1-3 suggests that we observe metals sites which have an increased +3 character and are supported by redox noninnocent 4,6,10-trihydroxo-3,5,7-trimethyl-1,4,6,10-tetraazaadamantane ligands. The latter conclusion is further corroborated by the observation that the free ligand can be readily oxidized to yield a NO-based radical.

Homoleptic mono-, di-, and tetra-iron complexes featuring phosphido ligands: a synthetic, structural, and spectroscopic study.

We report the first series of homoleptic phosphido iron complexes synthesized by treating either the ß-diketiminato complex [(Dippnacnac)FeCl2Li(dme)2] (Dippnacnac = HC[(CMe)N(C6H3-2,6-iPr2)]2) or [FeBr2(thf)2] with an excess of phosphides R2PLi (R = tBu, tBuPh, Cy, iPr). Reaction outcomes depend strongly on the bulkiness of the phosphido ligands. The use of tBu2PLi precursor led to an anionic diiron complex 1 encompassing a planar Fe2P2 core with two bridging and two terminal phosphido ligands. An analogous reaction employing less sterically demanding phosphides, tBuPhPLi and Cy2PLi yielded diiron anionic complexes 2 and 3, respectively, featuring a short Fe-Fe interaction supported by three bridging phosphido groups and one additional terminal R2P- ligand at each iron center. Further tuning of the P-substrates bulkiness gave a neutral phosphido complex 4 possessing a tetrahedral Fe4 cluster core held together by six bridging iPr2P moieties. Moreover, we also describe the first homoleptic phosphanylphosphido iron complex 5, which features an iron center with low coordination provided by three tBu2P-P(SiMe3)- ligands. The structures of compounds 1-5 were determined by single-crystal X-ray diffraction and 1-3 by 1H NMR spectroscopy. Moreover, the electronic structures of 1-3 were interrogated using zero-field Mössbauer spectroscopy and DFT methods.

Valence tautomerism in a cobalt-verdazyl coordination compound.

Coordination of 1-isopropyl-3,5-dipyridyl-6-oxoverdazyl to cobalt results in a dication best described in the solid state as a high spin cobalt(ii) ion coordinated to two radical ligands with an S = 3/2 ground state. On dissolution in acetonitrile, the cobalt(ii) form equilibrates with a cobalt(iii) valence tautomer with an S = 1/2 ground state.

Advanced Paramagnetic Resonance Studies on Manganese and Iron Corroles with a Formal d4 Electron Count.

Metallocorroles wherein the metal ion is MnIII and formally FeIV are studied here using field- and frequency-domain electron paramagnetic resonance techniques. The MnIII corrole, Mn(tpfc) (tpfc = 5,10,15-tris(pentafluorophenyl)corrole trianion), exhibits the following S = 2 zero-field splitting (zfs) parameters: D = -2.67(1) cm-1, |E| = 0.023(5) cm-1. This result and those for other MnIII tetrapyrroles indicate that when D ≈ - 2.5 ± 0.5 cm-1 for 4- or 5-coordinate and D ≈ - 3.5 ± 0.5 cm-1 for 6-coordinate complexes, the ground state description is [MnIII(Cor3-)]0 or [MnIII(P2-)]+ (Cor = corrole, P = porphyrin). The situation for formally FeIV corroles is more complicated, and it has been shown that for Fe(Cor)X, when X = Ph (phenyl), the ground state is a spin triplet best described by [FeIV(Cor3-)]+, but when X = halide, the ground state corresponds to [FeIII(Cor•2-)]+, wherein an intermediate spin (S = 3/2) FeIII is antiferromagnetically coupled to a corrole radical dianion (S = 1/2) to also give an S = 1 ground state. These two valence isomers can be distinguished by their zfs parameters, as determined here for Fe(tpc)X, X = Ph, Cl (tpc = 5,10,15-triphenylcorrole trianion). The complex with axial phenyl gives D = 21.1(2) cm-1, while that with axial chloride gives D = 14.6(1) cm-1. The D value for Fe(tpc)Ph is in rough agreement with the range of values reported for other FeIV complexes. In contrast, the D value for Fe(tpc)Cl is inconsistent with an FeIV description and represents a different type of iron center. Computational studies corroborate the zfs for the two types of iron corrole complexes. Thus, the zfs of metallocorroles can be diagnostic as to the electronic structure of a formally high oxidation state metallocorrole, and by extension to metalloporphyrins, although such studies have yet to be performed.

Radical Dimerization in a Plastic Organic Crystal Leads to Structural and Magnetic Bistability with Wide Thermal Hysteresis.

The nitroxyl radical 1-methyl-2-azaadamantane N-oxyl (Me-AZADO) exhibits magnetic bistability arising from a radical/dimer interconversion. The transition from the rotationally disordered paramagnetic plastic crystal, Me-AZADO, to the ordered diamagnetic crystalline phase, (Me-AZADO)2, has been conclusively demonstrated by crystal structure determination from high-resolution powder diffraction data and by solid-state NMR spectroscopy. The phase change is characterized by a wide thermal hysteresis with high sensitivity to even small applied pressures. The molecular dynamics of the phase transition from the plastic crystal to the conventional crystalline phase has been tracked by solid-state (1H and 13C) NMR and EPR spectroscopies.

Transition metal-mediated reductive coupling of diazoesters.

The first transition metal mediated reductive coupling of diazoesters through the terminal nitrogens is reported. The resulting tetrazene-bridged bis(diazenylacetate) serves as a novel dinucleating ligand to iron(III). DFT calculations suggest that the reductive coupling takes place via a κ2 intermediate, which induces significant radical character on the terminal nitrogen.

Square-planar Co(iii) in {O4} coordination: large ZFS and reactivity with ROS.

Oxidation of distorted square-planar perfluoropinacolate Co compound [CoII(pinF)2]2-, 1, to [CoIII(pinF)2]1-, 2, is reported. Rigidly square-planar 2 has an intermediate-spin, S = 1, ground state and very large zero-field splitting (ZFS) with D = 67.2 cm-1; |E| = 18.0 cm-1, (E/D = 0.27), g⊥ = 2.10, g‖ = 2.25 and χTIP = 1950 × 10-6 cm3 mol-1. This Co(iii) species, 2, reacts with ROS to oxidise two (pinF)2- ligands to form tetrahedral [CoII(Hpfa)4]2-, 3.

Observation of current rectification by the new bimetallic iron(iii) hydrophobe [Fe(LN4O6)] on Au|LB-molecule|Au devices.

Targeting the development of stimulus-responsive molecular materials with electronic functionality, we have synthesized and studied the redox and electronic properties of a new bimetallic iron hydrophobe [FeIII2(LN4O6)] (1). The new H6LN4O6 ligand displays bicompartmental topology capable of accomodating two five-coordinate HSFeIII ions bridged by tetraaminobenzene at a close distance of ca. 8 Å. We show that the metal-based reduction processes in (1) proceed sequentially, as observed for electronically coupled metal centers. This species forms a well-defined Pockels-Langmuir film at the air-water interface, with collapse pressure of 32 mN m-1. Langmuir-Blodgett monolayers were deposited on gold substrates and used to investigate current-voltage (I-V) measurements. This unprecedented bimetallic hydrophobe [FeIII2(LN4O6)] (1) shows unquestionable molecular rectification and displays a rectification ratio RR between 2 and 15.

Catalytic Nitrene Homocoupling by an Iron(II) Bis(alkoxide) Complex: Bulking Up the Alkoxide Enables a Wider Range of Substrates and Provides Insight into the Reaction Mechanism.

The reaction of HOR' (OR' = di-t-butyl-(3,5-diphenylphenyl)methoxide) with an iron(II) amide precursor forms the iron(II) bis(alkoxide) complex Fe(OR')2(THF)2 (2). 2 (5-10 mol %) serves as a catalyst for the conversion of aryl azides into the corresponding azoarenes. The highest yields are observed for aryl azides featuring two ortho substituents; other substitution patterns in the aryl azide precursor lead to moderate or low yields. The reaction of 2 with stoichiometric amounts (2 equiv) of the corresponding aryl azide shows the formation of azoarenes as the only organic products for the bulkier aryl azides (Ar = mesityl, 2,6-diethylphenyl). In contrast, formation of tetrazene complexes Fe(OR')2(ArNNNNAr) (3-6) is observed for the less bulky aryl azides (Ar = phenyl, 4-methylphenyl, 4-methoxyphenyl, 3,5-dimethylphenyl). The electronic structure of selected tetrazene complexes was probed by spectroscopy (field-dependent 57Fe Mössbauer and high-frequency EPR) and density functional theory calculations. These studies revealed that Fe(OR')2(ArNNNNAr) complexes contain high-spin ( S = 5/2) iron(III) centers exchange-coupled to tetrazene radical anions. Tetrazene complexes Fe(OR')2(ArNNNNAr) produce the corresponding azoarenes (ArNNAr) upon heating. Treatment of a tetrazene complex Fe(OR')2(ArNNNNAr) with a different azide (N3Ar') produces all three possible products ArNNAr, ArNNAr', and Ar'NNAr'. These experiments and quantum mechanics/molecular mechanics calculations exploring the reaction mechanism suggest that the tetrazene functionality serves as a masked form of the reactive iron mono(imido) species.

Probing Fe-V Bonding in a C3-Symmetric Heterobimetallic Complex.

Direct metal-metal bonding of two distinct first-row transition metals remains relatively unexplored compared to their second- and third-row heterobimetallic counterparts. Herein, a recently reported Fe-V triply bonded species, [V( iPrNPPh2)3FeI] (1; Kuppuswamy, S.; Powers, T. M.; Krogman, J. P.; Bezpalko, M. W.; Foxman, B. M.; Thomas, C. M. Vanadium-iron complexes featuring metal-metal multiple bonds. Chem. Sci. 2013, 4, 3557-3565), is investigated using high-frequency electron paramagnetic resonance, field- and temperature-dependent 57Fe nuclear gamma resonance (Mössbauer) spectroscopy, and high-field electron-electron double resonance detected nuclear magnetic resonance. From the use of this suite of physical methods, we have assessed the electronic structure of 1. These studies allow us to establish the effective g̃ tensors as well as the Fe/V electro-nuclear hyperfine interaction tensors of the spin S = 1/2 ground state. We have rationalized these tensors in the context of ligand field theory supported by quantum chemical calculations. This theoretical analysis suggests that the S = 1/2 ground state originates from a single unpaired electron predominately localized on the Fe site.

Ba3Fe1.56Ir1.44O9: A Polar Semiconducting Triple Perovskite with Near Room Temperature Magnetic Ordering.

The crystal chemistry and magnetic properties for two triple perovskites, Ba3Fe1.56Ir1.44O9 and Ba3NiIr2O9, grown as large, highly faceted single crystals from a molten strontium carbonate flux, are reported. Unlike the idealized A3MM2'O9 hexagonal symmetry characteristic of most triple perovskites, including Ba3NiIr2O9, Ba3Fe1.56Ir1.44O9 possesses significant site-disorder, resulting in a noncentrosymmetric polar structure with trigonal symmetry. The valence of iron and iridium in the heavily distorted Fe/Ir sites was determined to be Fe(III) and Ir(V) by X-ray absorption near edge spectroscopy (XANES). Density functional theory calculations were conducted to understand the effect of the trigonal distortion on the local Fe(III)O6 electronic structure, and the spin state of iron was determined to be S = 5/2 by Mössbauer spectroscopy. Conductivity measurements indicate thermally activated semiconducting behavior in the trigonal perovskite. Magnetic properties were measured and near room temperature magnetic ordering (TN = 270 K) was observed for Ba3Fe1.56Ir1.44O9.

Chemical reaction within a compact non-porous crystal containing molecular clusters without the loss of crystallinity.

The very rare occurrence of a gas-solid chemical reaction has been found to take place on a molecule within a compact non-porous crystal without destroying its long-range structural order and retaining similar crystal structures when yellow crystals of FeII4(mbm)4Cl4(MeOH)4 were exposed to air to give black [FeIII4(mbm)4Cl4(OH)4]·2H2O. The latter cannot be synthesised directly. The original cluster underwent an exchange of methanol to hydroxide, an oxidation of Fe(ii) to Fe(iii), a change in stereochemistry and hydration while the packing and space-group remained unaltered.

Synthetic, Structural, and Spectroscopic Characterization of a Novel Family of High-Spin Iron(II) [(ß-Diketiminate)(phosphanylphosphido)] Complexes.

This work describes a series of iron(II) phosphanylphosphido complexes. These compounds were obtained by reacting lithiated diphosphanes R2PP(SiMe3)Li (R = t-Bu, i-Pr) with an iron(II) ß-diketiminate complex, [LFe(µ2-Cl)2Li(DME)2] (1), where DME = 1,2-dimethoxyethane and L = Dippnacnac (ß-diketiminate). While the reaction of 1 with t-Bu2PP(SiMe3)Li yields [LFe(η1-Me3SiPP-t-Bu2)] (2), that of 1 with equimolar amounts of i-Pr2PP(SiMe3)Li, in DME, leads to [LFe(η2-i-Pr2PPSiMe3)] (3). In contrast, the reaction of 1 with (i-Pr2N)2PP(SiMe3)Li provides not an iron-containing complex but 1-[(diisopropylamino)phosphine]-2,4-bis(diisopropylamino)-3-(trimethylsilyl)tetraphosphetane (4). The structures of 2-4 were determined using diffractometry. Thus, 2 exhibits a three-coordinate iron site and 3 a four-coordinate iron site. The increase in the coordination number is induced by the change from an anticlinal to a synclinal conformation of the phoshpanylphosphido ligands. The electronic structures of 2 and 3 were assessed through a combined field-dependent 57Fe Mössbauer and high-frequency and -field electron paramagnetic resonance spectroscopic investigation in conjunction with analysis of their magnetic susceptibility and magnetization data. These studies revealed two high-spin iron(II) sites with S = 2 ground states that have different properties. While 2 exhibits a zero-field splitting described by a positive D parameter (D = +17.4 cm-1; E/D = 0.11) for 3, this parameter is negative [D = -25(5) cm-1; E/D = 0.15(5)]. Density functional theory (DFT) and time-dependent DFT (TDDFT) calculations provide insights into the origin of these differences and allow us to rationalize the fine and hyperfine structure parameters of 2 and 3. Thus, for 2, the spin-orbit coupling mixes a z2-type ground state with two low-lying {xz/yz} orbital states. These interactions lead to an easy plane of magnetization, which is essentially parallel to the plane defined by the N-Fe-N atoms. For 3, we find a yz-type ground state that is strongly mixed with a low-lying z2-type orbital state. In this case, the spin-orbit interaction leads to a partial unquenching of the orbital momentum along the x axis, that is, to an easy axis of magnetization oriented roughly along the Fe-P bond of the phosphido moiety.

Structural, Spectroscopic, and Theoretical Investigation of a T-Shaped [Fe3(µ3-O)] Cluster.

The synthesis, X-ray crystal and electronic structures of [Fe3(µ3-O)(mpmae)2(OAc)2 Cl3], 1, where mpmae-H = 2-(N-methyl-N-((pyridine-2-yl)methyl)amino)ethanol, are described. This cluster comprises three high-spin ferric ions and exhibits a T-shaped site topology. Variable-frequency electron paramagnetic resonance measurements performed on single crystals of 1 demonstrate a total spin ST = 5/2 ground state, characterized by a small, negative, and nearly axial zero-field splitting tensor D = -0.49 cm-1, E/D ≈ 0.055. Analysis of magnetic susceptibility, magnetization, and magneto-structural correlations further corroborate the presence of a sextet ground-spin state. The observed ground state originates from the strong anti-ferromagnetic interaction of two iron(III) spins, with J = 115(5) cm-1, that, in turn, are only weakly coupled to the spin of the third site, with j = 7(1) cm-1. These exchange interactions lead to a ground state with magnetic properties that are essentially entirely determined by the weakly coupled site. The contributions of the individual spins to the total ground state of the cluster were monitored using variable-field 57Fe Mössbauer spectroscopy. Field-dependent spectra reveal that, while one of the iron sites exhibits a large negative internal field, typical of ferric ions, the other two sites exhibit small, but not null, negative and positive internal fields. A theoretical analysis reveals that these small internal fields originate from the mixing of the lowest ST = 5/2 excited state into the ground state which, in turn, is induced by a minute structural distortion.